Published by J. R. Maglin & R. Ramesh, Department of Electrical and Electronics Engineering, Anna University, Chennai-25, India, E-mail: rramesh@annauniv.edu, Tel: +91-9444217600Published in European Journal of Scientific ResearchISSN 1450-216X Vol.61 No.2 (2011), pp. 321-327http://www.eurojournals.com/ejsr.htm Abstract The main objective of this paper is to identify the problems associated with solar converters in the solar power systemContinue reading “Power Quality Issues in Solar Converters: A Review”
Author Archives: PQBlog
High Neutral-to-Ground Voltages
Published by Electrotek Concepts, Inc., PQSoft Case Study: PQ Investigation at a Battery Facility, Document ID: PQS0401, Date: March 30, 2004. Abstract: An office complex was experiencing continual operational problems with some of their electronic equipment not protected by power conditioning equipment. The equipment would periodically exhibit strange behavior. An infrared heat detector was used toContinue reading “High Neutral-to-Ground Voltages”
Power Quality: A 25-Year History and What’s Next
Published by Tom Key, EPRI PEAC, Knoxville, TN, Email: tkey@epri-peac.com, 2003
PQ Investigation at a Battery Facility
Published by Electrotek Concepts, Inc., PQSoft Case Study: PQ Investigation at a Battery Facility, Document ID: PQS0402, Date: March 30, 2004. Abstract: This case study presents the results of a power quality investigation at a battery manufacturing facility. The facility had been experiencing a high rate of motor failures and was experiencing problems with its computerContinue reading “PQ Investigation at a Battery Facility”
ITI (CBEMA) Curve Application Note
Published by Information Technology Industry Council (ITI), 1250 Eye Street NW Suite 200, Washington DC 20005, 202-737-8888, http://www.itic.org The ITI (CBEMA) Curve, included within this Application Note, is published by Technical Committee 3 (TC3) of the Information Technology Industry Council (ITI, formerly known as the Computer & Business Equipment Manufacturers Association). It is available atContinue reading “ITI (CBEMA) Curve Application Note”
Flickering Lights
Published by Electrotek Concepts, Inc., PQSoft Case Study: Flickering Lights Wiring and Grounding Case Study, Document ID: PQS0403, March 30, 2004. Abstract: This case study concerns a residential electrical system. The homeowners were experiencing light flicker when loads were energized and de-energized in their home. INTRODUCTION Residential electric systems are served from single-phase transformers employing aContinue reading “Flickering Lights”
Power Quality Standards, Problems and their Solutions
Published by Vedant S. Samudre, Department of electrical, electronics & power, Jawaharlal, Nehru Engineering College, Aurangabad, Maharashtra, IndiaPublished in International Journal of Engineering Sciences & Research Technology (IJESRT)Website: http://www.ijesrt.comSamudre* et al., 5(12): December, 2016DOI: 10.5281/zenodo.192584 ABSTRACT Power quality is one of the major concerns and emerging issues in the present era. With increasing quantities ofContinue reading “Power Quality Standards, Problems and their Solutions”
Power Quality Standards: CBEMA, ITIC, SEMI F47, IEC 61000-4-11/34
Published by Mark Stephens, PE, Manager, Industrial Studies, Electric Power Research Institute (EPRI), 942 Corridor Park Blvd, Knoxville, Tennessee 37932, Phone 865.218.8022, Email: mstephens@epri.com
General Reference – Performing Power Quality Audits
Published by Electrotek Concepts, Inc., PQSoft Case Study: General Reference – Performing Power Quality Audits, Document ID: PQS0306, Date: February 4, 2003. Abstract: Power quality investigations often require monitoring to identify the exact problem and then to verify the solutions that are implemented. Before embarking on extensive monitoring programs, it is important to develop an understandingContinue reading “General Reference – Performing Power Quality Audits”
What Is Electrical Grounding – Top 10 Questions and Answers
Published by Pablo Diaz, P.Eng, Grounding Systems Technologies (GST), The Electricity Forum, Power Quality and Ground Articles. What is Electrical Grounding? Electrical Grounding is defined as the process of transferring the immediate discharge of electricity directly to the Earth with the help of a low-resistance wire. Electrical grounding was invented as a safety system to help prevent people andContinue reading “What Is Electrical Grounding – Top 10 Questions and Answers”